Nanjing Younarui Bearing Co., Ltd.
Main products:Bearing
Products
Contact Us
  • Contact Person : Mr. YU liang
  • Company Name : Nanjing Younarui Bearing Co., Ltd.
  • Tel : 86-25-52271857
  • Fax : 86-25-52271957
  • Address : Jiangsu,nanjing,zhongshan road 369
  • Country/Region : China
  • Zip : 210002

CARB toroidal roller bearings, cylindrical and tapered bore C31/1000KMB*

CARB toroidal roller bearings, cylindrical and tapered bore C31/1000KMB*
Product Detailed
1.10 year experience, 2.Certificate ISO9001.2008, 3.Material: Bearing steel, 4.Various size and type, 5.3-7 days deliver

The CARB toroidal roller bearing is a completely new type of radial roller bearing (fig 1). This compact self-aligning roller bearing was developed by SKF and introduced on the market in 1995. In a unique design, it combines the self-aligning capability of the spherical roller bearing with the unconstrained axial displacement ability of the cylindrical roller bearing. It can also have the compact cross section normally associated with the needle roller bearing.

Demo, self-aligning Demo, axial displacement

The applicability of CARB bearings covers a wide range with regard to radial loads. They are intended exclusively as non-locating bearings and as such they are excellent with their combination of self-aligning and axial displacement properties, opening up completely new opportunities to save space, weight and production costs. By deliberately displacing the rings axially with respect to each other it is possible to accurately set the radial internal clearance in the bearing.

CARB bearings permit smaller and lighter bearing arrangement designs offering the same or improved performance in a particularly impressive manner, e.g. in planetary gearboxes. They simplify the bearing arrangement design for long shafts that are subjected to temperature variations. When using CARB bearings, it has also been proven that vibration levels are reduced, e.g. in paper machines or fans.

The CARB bearing is a single row bearing with long, slightly crowned symmetrical rollers. The raceways of both the inner and outer rings are concave and situated symmetrically about the bearing centre. The attained optimal combination of both raceway profiles provides a favourable load distribution in the bearing, as well as low frictional running.

The rollers of the CARB bearing are self-guiding, i.e. they will always adopt the position where the load is evenly distributed over the roller length - irrespective of whether the inner ring is axially displaced and/or misaligned with respect to the outer ring.

The load carrying capacity of the CARB bearing is very high even when it has to compensate for angular misalignment or axial displacement. This results in an operationally reliable bearing arrangement with long service life.

Supplementary designations

The designation suffixes used to identify certain features of CARB bearings are explained in the following.

C2 Radial internal clearance smaller than Normal
C3 Radial internal clearance larger than Normal
C4 Radial internal clearance larger than C3
C5 Radial internal clearance larger than C4
CS5 Sheet steel reinforced contact seal of hydrogenated acrylonitrile-butadiene rubber (HNBR) on one side of the bearing
2CS5 CS5 contact seal on both sides of the bearing. Free space in the bearing filled between 70 and 100% with a high temperature grease.
HA3 Case-hardened inner ring
K Tapered bore, taper 1:12
K30 Tapered bore, taper 1:30
M Machined window-type brass cage, roller centred
MB Two-piece machined brass cage, inner ring centred
TN9 Injection moulded window-type cage of glass fibre reinforced polyamide 4,6, roller centred
V Full complement of rollers (no cage)
VE240 Bearing modified for greater axial displacement
VG114 Surface hardened steel cage, roller centred
 

CARB toroidal roller bearings, cylindrical and tapered bore C31/1000KMB*



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.